2011 |
Chih-Chieh Kang, Jeng-Feng Lin, Hong-Ze Li, Shi-Hu Zeng,A large-sized directional LED backlight unit with hollow cavity light guide,SID 2011(Display Week 2011) |
2010 |
Chih-Chieh Kang, Jeng-Feng Lin, Cheng-Fang Ho, Wei-Cheng Cheng , Yu-Chang Wu1 and Ming-Chih Tsai,A simplified model of on-axis luminance gain measurement for novel optical film development in simulation, 2010 International Conference on Optics and Photonics in Taiwan(OPT'10) |
2010 |
Jeng-Feng Lin, Chin-Chieh Kang, and Chih-Yang Liu,Design of 2.2-inch LED backlight units for brightness uniformity and reduction of hot-spot effect,2010 International Conference on Optics and Photonics in Taiwan(OPT'10) |
2010 |
Jeng-Feng Lin, Chin-Chieh Kang, and Shih-Fu Tseng,Analytical haze simulation of optical films with 2D paraboloidal microlens array,2010 International Conference on Optics and Photonics in Taiwan(OPT'10) |
2009 |
林正峰、曾世福、康智傑,光學膜霧度的模擬,OPT2009 |
2009 |
林正峰 謝耀文 康智傑,導光板上表面的粗糙化及光學模擬,OPT2009 |
2009 |
Shih-Cheng Yeh, Shao-Tun Chung, C. C. Kang, J. F. Lin,LED uniform surface light source with no light guide plate,2009 International Symposium on Nano Science and Technology |
2009 |
Chih-Chieh Kang, Jeng-Feng Lin, Cho-Wei Chen, Yu-Chang Wu,Virtual mechanism for displaying viewing angle related mura of a backlight unit in simulation, iMiD09 (The 9th International Meeting on Information Display) |
2009 |
Chih-Chieh Kang, Jeng-Feng Lin, Jiun-Shian Yu, Cho-Wei Chen, Shi-Fu Zen,Optimal design of a double-side v-groove light guide plate in a LED backlight unit,ASID |
2008 |
Jeng-Feng Lin, Yao-Wen Hsieh and Chin-Chieh Kang,Modeling and design of surface roughness to the top surface of the Parallel light guide plate of 3.5-inch backlight units for brightness uniformity,OPT2008(2008 |
2008 |
Jeng-Feng Lin, Ke-Jing Li, and Chih-Chieh Kang,Application of V-groove Structure on the Cover Glass of Thin-film Solar Cells to Reduce Surface Reflection,2008 |
2008 |
Chih-Chieh Kang, Jeng-Feng Lin, Yu-Chang Wu, Fang-Yi Chou, Jun-Zhi huang, Cho-Wei Chen,Study of bright fringes near the incident surface of a wedge-type light guide plate in an edge-type backlight unit,2008 |
2005 |
8. 林正峰及邱華楠,”設計繞射光學元件之模擬退火法的研究,” 2005台灣光電科技研討會,成功大學,台南,十二月,2005年,論文編號PD-FR1-16 |
2005 |
Jeng-Feng Lin and Shih-Kun Lin, ”Effects of radius of air rods in two-dimensional photonic crystals optimized for large full bandgaps,” 2005 International Symposium on Nano Science and Technology,南台科技大學,台南,十一月,2005年,p193-194,論文編號PD005。 |
2003 |
Jeng-Feng Lin and Shih-Kun Lin, ”Optimization of the photonic band gap of two-dimensional photonic crystals of triangular lattice,” 2003奈米國際科技研討會,南台科技大學,台南,十一月,2003年,p237-238。 |
2003 |
Jeng-Feng Lin and Shih-Kun Lin, ”Optimization of the photonic band gap of two-dimensional photonic crystals of square lattice,” 2003台灣光電科技研討會,台北,十二月,2003年。 |
2002 |
林正峰及杜彥錫,”消色差複合式透鏡繞射效率的模擬,” 第十七屆全國技術及職業教育研討會(4/2002),論文編號為工B064,p949-958。 |
2002 |
H. N. Chiu and Jeng-Feng Lin, ”Study of the simulated annealing algorithm for the design of diffractive optical elements,” 2002 物理學會年會,二月,物理雙月刊二十四卷一期(摘要)。 |
2002 |
Y. S. Do, Jeng-Feng Lin, and H. N. Chiu, “Design and modeling of the hybrid achromatic lens,” 2002 物理學會年會,二月,物理雙月刊二十四卷一期(摘要)。 |
2002 |
林正峰,林世堃及杜彥錫,” 消色差複合式透鏡之模擬與分析,”2002台灣光電科技研討會,台北,十二月,論文集III,p433-435。 |
2001 |
Jeng-Feng Lin, “Verification and comparison of two efficiency limits of spatially quantized Fourier-type periodic diffractive optical elements,” 2001台灣光電科技研討會,高雄,十二月,p1158-1160。 |